This is a basic and more universal option to get most cars up and running with Turbo Lamik TCU 2.0 within their 8HP swap. Please note the lengths of each branch of the harness and check they will suit your application. Also note the functionality of the branch. This does not cover full TurboLamik features, but you can also add something to this harness if needed or ofcourse repurpse, by repining the main connector.
We are hoping these dimensions will suit most vehicles with minimal modifications. We have made the assumption its much easier to shorten the harness branch than extend them.
THERE ARE 2 OPTIONS FOR PURCHASE. IF YOU PURCHASE THIS AT THE SAME TIME YOU PURCHASE OUR LAMIK BASIC TCU PACKAGE SELECT OPTION 1. IF YOU ARE ONLY BUYING THE HARNESS IN THIS ORDER YOU MUST SELECT OPTION 2.
For option 1 we will use the connector plugs and pins from the TCU package to assemble the harness.
Branch Function | Wire Length |
TCU to Transmission | 2000mm |
TCU to Shift Selector | 1500mm |
Shift Selector Type | BMW 10 Pin |
TCU to Display | 1500mm |
TCU to Program Switch/Virtual Clutch In | 1500mm |
TCU to Ground | 700mm |
TCU to Power Supply | 700mm |
TCU to Ignition | 700mm |
TCU to Engine CAN | 1200mm |
TCU to Foot Brake Signal | 1500mm |
TCU to Shift Paddles (ground signal) | 1500mm |